Apollo 9 Flown Lunar Module “Spider” Kapton Foil
Browse Apollo 9 flown Kapton covers
APOLLOSPACE is pleased to offer a collection of Apollo 9 event covers which have been affixed with a remnant piece of Kapton foil that was originally part of the protective insulation of the Apollo 9 Lunar Module, “Spider,” and was flown in space as part of that spacecraft from March 3-13, 1969. The original Kapton from which the attached remnant was cut was retrieved from the Lunar Module by Apollo 9 Lunar Module Pilot Rusty Schweickart shortly before the LM was jettisoned from the Command Module.
This remnant was cut from a larger piece measuring approximately 6-inches long that was part of Rusty Schweickart’s personal collection until consigned by him to Heritage Auction in May 2019 as LOT #50939, shown below. That larger piece of Kapton was purchased by me at that time and sectioned off as shown: the approximately two-inch piece accompanying this Letter that was retained, another piece measuring approximately 1.5 x 1.5 inches that was cut into four smaller pieces measuring .75 x .75 inches each, and the remaining approximately 2.5-inch piece, pictured at center and boxed in red, that was cut into smaller remnants which were attached with archival glue to 53 Apollo 9 event covers
Each Apollo 16 event cover (commemorating an event contemporaneously during the mission) has been carefully selected for quality and condition. The flown kapton foil has been affixed to the front of the cover within a 1-inch stamp.
On the reverse, each cover is assigned a unique series number.
Each cover is accompanied by a Letter of Authenticity fully describing the provenance of the flown Kapton foil.
